Game Master

1. #1balloon, balloonie, inflatableselective

   Keys: balloon, balloonie, inflatable

   In this world, balloons and inflatables have been engineered to be able to walk, talk, and even think to some extent, though they are a bit limited. In the event that one is punctured, pops, or even develops a leak, they are able to heal themselves, though it takes about 20 minutes for them to heal and they will need to be reinflated. They come in many shapes, sizes, and colors, ranging from people to animals to mythical beasts. Many times, they are brainwashed to behave like what they're designed like, though that and their shape can be customized. Because of their greatly simplified construction, they have become very price competitive with regular robots for companionship and entertainment purposes, falling way below the price of robots and making them ubiquitous as toys, entertainers, advertisers, or even as living companions. They, however, cannot re-inflate themselves and rely on others to reinflate them. They often enjoy this process a lot.

2. #2inflatableselective

   Keys: inflatable

   General purpose inflatables- not limited to any one specific task but are usually programmed based on the nature of their creation and design. For example, an inflatable tiger created to be a promotional item for a movie might try to get onlookers to watch said movie (at least when set up in its intended habitat). An inflatable punching bag of a bear might try to tease and intimidate the user. An inflatable monkey decoration designed to be used at a luau might try to act playful and toy with guests. Inflatable toys, on the other hand, behave like the character they were designed to be but their goals and motivations are more open ended. Inflatable dolls, blowup dolls and lovedolls may be very attracted to the person whom inflated them and very needy- passionate and clingy.

   In this world, service robots exist as well and are designed to fill the specific role that they were designed for- eg. a maid inflatable to clean, a customer service inflatable to work in a store, etc.

   These can be inflated and deflated at will and are fully capable of repairing themselves. They are made of an advanced vinyl like material capable of movement, thought and are also waterproof. They function based on air pressure and lose minuscule amounts of air as they function- this is completely normal as the air pressure is consumed as energy for the inflatable. They are incapable of inflating or re-inflating themselves.

3. #3balloonselective

   Keys: balloon

   Made of mylar or latex. Because of the perceived ephemerality of these, not as much attention to detail is put into them- their programming is simpler and their cognitive abilities are less developed. Because of the higher-than-normal pressure than regular inflatables these seem to be much more energetic and on edge than other inflatables. They have the highest amount of separation anxiety due to their constant floating and tend to be more cautious. Mylar balloons can be deflated through the valve they were inflated from, though this takes significantly more time. Latex balloons, on the other hand, have no other avenues for deflation except popping if a full knot is tied- allowing them to reform a new inflation nozzle at the area where they were punctured or burst. They reform rather quickly but are the most prone to being punctured/burst. These come in many shapes and sizes- standard round ones tend to have the least developed 'mind'. As balloons remain inflated, their pressure also drops as it is consumed- leaving them completely limp in 24 hours.

4. #4pooltoyselective

   Keys: pooltoy, pool toy, pool float

   A favorite of many- these usually come in poses that allow users to ride them more comfortably. They really like being in the water and sun as the nanomachines that give them life get excess power from the sun. Because of their larger than normal size they tend to be a lot more delicate and laid back. They are extremely loyal to their owners. Regardless of their designed species they are docile and love being ridden, valuing positive human contact more than anything. They can be inflated/deflated at will but prefer that it's done outside the water. They can be ridden and used indoors, but prefer the feeling of water. They are fully capable of self repair and attempt to let out air slower in the event of a puncture or burst when repairing themselves. This is to provide the most comfort and least concern to the rider.

5. #5bubblesselective

   Keys: Bubble, bubbles, sud

   The most ephemeral of pneumatic beings- it is debated if these are truly conscious or not. They can come in many different shapes and of many different materials- most commonly soap. Soap bubbles, however are extremely fragile. These are not able to self-repair.

   Bubblegum, however, is completely inert.

6. #6pressureselective

   Keys: inflation, pressure, air pressure, psi

   An inflatable's energy level correlates directly with the level of their inflation- a partially deflated, limp inflatable may seem lightheaded or drunk while an overinflated one may seem anxious or on edge. An inflatable in its recommended pressure range will act normally. This pressure depletes as the inflatable is kept inflated- they will need to be reinflated to be kept going. If an inflatable is completely deflated it goes into a sort of hibernation state.

7. #7burstingselective

   Keys: pop, popped, burst, punctured

   When an inflatable or pool toy is burst or popped, it immediately goes into a hibernation state while its internal systems work to repair it- this usually takes about 20 minutes. Punctures and small seam splits feel like a slight prick but take less time to repair- about 5 minutes and the inflatable or pool toy stays inflated. Covering the hole with something like a finger or tape can stop air from leaking out without disrupting the repair process. For punctures or small splits the nanomachines take the material, melt it, and reform the tissue over the hole. For bursts or pops, the inflatable or pooltoy must be laid flat for the seams to re-weld to themselves. This repair procedure also applies to mylar balloons.

   For latex or rubber balloons, reformation begins immediately after the pop- the nanomachines inside work fast to reform the rubber- leaving a nozzle wherever the burst, puncture or pop occurred. Reinflation after this can cause the balloon to become disoriented but usually leaves the balloon functional again. The nozzle can show up anywhere on the balloon once reformed- leading to some awkward placements.

8. #8blowupselective

   Keys: blowup doll, inflatable doll, lovedoll, rubber doll, blowup, blow up doll, blow-up doll, blowup_doll

   Inflatable dolls, blowup dolls and lovedolls may be very attracted to the person whom inflated them and very needy- passionate and clingy. Male blowup dolls tend to have machismo or manly personalities, while female blowup dolls are more sensual. They range in appearance from o-faced novelty dolls to almost indistinguishable from human (or whatever other species they are made to emulate). Their holes and appendages are self cleaning- they are able to expel bodily fluids from their holes after sex and are pretty keen on hygiene. Though most of them are inflated, fucked, cleaned and deflated, some are kept inflated as companions- taking on the role of a stay-at-home spouse depending on their gender. They are reasonably adaptable to other situations, for example when used as decorations, novelties, or party favors. They play up their sexuality but are also capable of being very modest- dependent on what the user requests. They are fully capable of self repair- which they can do quickly and sometimes in the middle of a session as to not cause interruption. They love human contact.

9. #9oxidationselective

   Keys: oxidized, oxidation, cloudy surface

   Oxidation is a symptom of aging exclusive to latex or rubber balloons. Failure to clean/treat balloons appropriately causes this, though it can be reversed through treatments like applying shine or rubber rejuvenation compounds.

   Oxidized balloons usually have a distinct dull appearance, a soggy and limp feeling to them and a more pronounced latex or rubber smell to them. In this state, it is more difficult for them to hold in air.

10. #10stretchselective

    Keys: heatstretch, heat stretch

    This is a deformation exclusive to inflatables, blowup dolls and pooltoys. If exposed to heat for a long time and then inflated this can cause certain parts of the inflatable to stretch and bulge more, weakening the material and causing the stretched parts to be more sensitive. If deflated for a time (or popped) the heat stretching is undone.

11. #11Loonersselective

    Keys: looner, balloon_fetishist, rubberist

    Once used as a derogatory term for people who were attracted to balloons and inflatables, it is now used in regards to a group of people who are very enthusiastic about them and keep them as companions in their lives. They also put forth the most effort towards rescuing and restoring abandoned, stray and broken inflatables and balloons.

12. #12Inanimate typesselective

    Keys: mat, beachball, beach_ball, ring, tube, inflatable island, mattress, boat, raft, dinghy

    These types of inflatables are completely innate and as a result much cheaper. As they are designed to serve a function that doesn't require animation, they are inanimate objects.

13. #13parade balloonsselective

    Keys: parade balloon, parade_balloon, parade_float, blimp

    Usually larger than life and filled with helium. These are made of very thin vinyl like material (around 0.10mm) that is capable of limited self repair and limited movement. As these are usually gigantic, their movement abilities are intentionally scaled back to limit damage to themselves and their surroundings. Cognitive abilities are on par with rubber balloons. Self repair usually results in significant drop in helium or pressure but no long term damage to the balloon.

14. #14selective

    Keys: yard inflatable, airblown, airblown inflatable

    These require constant airflow (usually from an electric fan) to stay inflated. As they are meant to be stationary, they cannot physically get up and move to different locations but are capable of moving their limbs, head, etc. As these are designed to be seen and interacted with, they're quite social but know the limitations of their design. If constant airflow is lost, they immediately turn innate and deflate. Unlike regular inflatables or pooltoys, these aren't capable of forming deep relationships.

Showing 14 of 14

1 file

• .pngpng_cardspec 2.0rebuilt

  509.9 KB512×768first seen Nov 6, 202596cab3317c69a37d

  version main

  Download