Dungeon Furniture Compendium

1. #1St. Andrew's Cross

   Keys: st andrews cross, x-frame, andrew's cross, x cross, saltire cross, st. andrew's cross

   Enabled · Selective · Before character · Order 100 · 100%

   Entry settings

   St. Andrew's Cross: A large X-shaped frame for spread-eagle standing restraint. Two diagonal beams of 2"x4" steel rectangular tubing, MIG-welded at the center junction, span approximately 7 feet tip to tip. Powder-coated matte black. Each arm padded along its inner face with 1" closed-cell foam under medical-grade antimicrobial PU leather. Restraint points: padded 2" leather cuffs with stainless roller buckles at each of the four extremity positions (wrists upper, ankles lower), anchored to welded 316 stainless D-rings. Additional D-rings at mid-arm and mid-leg positions for supplementary straps. Center junction features a waist strap anchor. The occupant stands facing the cross (front-access, back exposed) or facing outward (rear-access, front exposed). Wall-mount version: four heavy-duty lag bolts into structural studs or masonry. Freestanding version: bolts to a weighted steel base plate (80 lbs) with leveling feet and optional floor anchors. Accommodates occupants 5'0" to 6'4" via adjustable cuff anchor positions along slotted channels on each arm. All hardware 316 stainless steel.

2. #2Spanking / Whipping Bench

   Keys: punishment bench, whipping bench, spanking bench, flogging bench

   Enabled · Selective · Before character · Order 100 · 100%

   Entry settings

   Spanking/Whipping Bench: A padded bench positioning the occupant bent forward at the waist with buttocks elevated and presented. Frame: welded 2"x2" steel square tubing, powder-coated matte black. Central torso pad: 24"x14"x4" high-density foam under antimicrobial PU leather, angled downward from hip to chest at approximately 15 degrees. Hip bolster at the rear edge elevates the pelvis. Knee pad shelf: two padded platforms at the base, occupant kneels with shins supported. Restraint points: padded leather cuffs at wrist positions (forward and low, attached to front frame legs via D-rings), ankle cuffs attached to rear legs, waist/hip strap across the lower back, optional thigh straps. Torso pad height adjustable 24"-36" via telescoping legs with locking pins. The buttocks, upper thighs, and genital area are fully exposed and accessible from behind. Frame width is open with no rear crossbar obstructing the striking zone. Floor footprint approximately 48"x28". Optional floor bolt-down plates. All hardware 316 stainless.

3. #3Automated Spanking/Caning Rig (sub-entry of Spanking Bench)

   Keys: automated caning, spanking rig, caning machine, caning rig, automated spanking, spanking machine

   Enabled · Selective · Before character · Order 100 · 100%

   Entry settings

   Automated Spanking/Caning Rig: An electromechanical striking arm that mounts to the frame of a spanking bench or operates standalone on its own pedestal. Arm: 24" articulating steel arm with a universal implement mount at the tip accepting paddles, straps, canes, or crops via quick-release clamp. Motor: geared DC servo driving the arm through a programmable arc of 15 to 90 degrees. Controls: dedicated panel with settings for stroke intensity (servo speed/force), stroke rate (1-60 strokes per minute), total stroke count or continuous mode, pause intervals, and pattern programs (steady rhythm, accelerating, random spacing). Targeting: arm mount adjustable vertically and laterally on its pedestal to align the strike zone precisely with the occupant's buttocks or thighs. Safety: emergency stop button, servo current limit prevents force exceeding calibrated maximum, implement mount includes a breakaway clutch releasing under excessive resistance. When paired with a spanking bench, the occupant is restrained while the rig delivers consistent programmable impact over extended periods without operator fatigue.

4. #4Bondage Chair

   Keys: bondage chair, restraint chair

   Enabled · Selective · Before character · Order 100 · 100%

   Entry settings

   Bondage Chair: A heavy rigid chair with integrated restraint points at all limb and torso positions. Frame: welded 1.5" steel square tubing, powder-coated matte black. Seat and backrest: contoured 2" high-density foam under antimicrobial PU leather. Seat height 18". Armrests: padded steel, each with two D-ring anchor points (forearm and wrist) and a padded 2" leather cuff at the wrist. Restraint points: wrist cuffs on armrests, ankle cuffs at front legs on short tethers, waist strap across the lap, chest strap across upper torso pinning occupant to backrest, optional collar tether at top of backrest. Legs spaced to allow thighs to be spread. Optional stirrup attachments replace standard front legs: articulating steel arms with padded foot cradles positioning legs elevated and spread, converting the chair to a gynecological configuration. Weight approximately 60 lbs. Rubber-padded leveling feet. Optional floor bolt-down plates. All hardware 316 stainless steel.

5. #5Stocks (Wrist / Head-and-Wrist / Ankle variants)

   Keys: stocks, wrist stocks, wrist stock, ankle stocks, ankle stock, head stocks

   Enabled · Selective · Before character · Order 100 · 100%

   Entry settings

   Stocks: Two horizontal steel plates with semicircular cutouts that when closed form circular openings trapping the occupant's limbs or head. Construction: 3/16" steel plates with radiused, polished, silicone-gasket-lined apertures. Hinged on one side, padlocked on the other. WRIST STOCKS: Freestanding or table-mounted frame holding a horizontal stock plate at approximately 30" height. Two apertures for wrists (interchangeable inserts: 2", 2.5", 3" diameter). Occupant stands or kneels with hands trapped forward. Frame has D-ring anchors for supplementary ankle or waist tethers. HEAD-AND-WRIST STOCKS: Mounted between two uprights at approximately 48" height. Three apertures: center for neck (adjustable 4"-5.5"), flanking for each wrist (adjustable 2"-3"). Occupant stands bent slightly forward with head and hands locked. Post height adjustable via telescoping mount. ANKLE STOCKS: Low frame at floor level. Two apertures for ankles (adjustable 3"-4"). Occupant sits or lies with feet locked. Often combined with other restraints. All variants: 316 stainless or powder-coated steel. Silicone gasket liners. Brass padlocks included. Aperture adjustment via interchangeable insert plates secured by thumbscrews.

6. #6Full Body Stock

   Keys: full body stock, body stock, full-body stock

   Enabled · Selective · Before character · Order 100 · 100%

   Entry settings

   Full Body Stock: A large horizontal stock plate with apertures for the head, both wrists, and both ankles simultaneously in a single plane. Frame: rectangular steel approximately 72"x36" on adjustable legs at 24"-36" height. Five apertures arranged anatomically: center-top for neck, two upper flanking for wrists, two lower flanking for ankles. All apertures individually adjustable via interchangeable insert plates. Stock plate hinged along the centerline and padlocked at both ends. The occupant lies across the lower half, upper half folds down and locks, capturing all five points simultaneously. Padded foam and PU leather liner along the stock edge supports body weight at the contact line. The occupant is fully spread and immobilized in a single device — accessible from both above and below if elevated sufficiently. 316 stainless or powder-coated steel. Silicone gasket liners at all apertures. Brass padlocks included.

7. #7Fiddle / Portable Yoke

   Keys: fiddle, neck yoke, fiddle yoke, portable yoke

   Enabled · Selective · Before character · Order 100 · 100%

   Entry settings

   Fiddle/Portable Yoke: A portable single-piece restraint combining neck and wrist capture in one unit. A rigid steel yoke shaped like an elongated figure-eight with three apertures: center for the neck, outer ends for each wrist. The occupant's hands are locked at either side of their own neck, preventing use of the arms while leaving the body otherwise unrestricted. Construction: 3/16" steel plate, hinged at one end of each aperture, padlocked at the other. Interior lined with 2mm medical-grade silicone. Total width approximately 24". Weight approximately 3 lbs. Worn rather than furniture-mounted, but can be tethered to wall D-rings or furniture via a ring welded at the throat of the yoke. The occupant can walk, kneel, or stand but cannot touch their own body, remove other restraints, or effectively resist. Powder-coated matte black. Small brass padlock included.

8. #8Tongue Stocks / Mouth Gag Frame

   Keys: tongue clamp, mouth frame, tongue stock, mouth gag frame, tongue stocks

   Enabled · Selective · Before character · Order 100 · 100%

   Entry settings

   Tongue Stocks/Mouth Gag Frame: A head-immobilizing frame that holds the mouth forced open with the tongue extended and accessible. A rigid steel headband (adjustable 20"-24" circumference) secured by a rear tightening screw, with a vertical chin bracket and upper forehead brace preventing head tilt. A small pair of stock plates extend forward from the chin bracket, forming a narrow 1" aperture that captures and pins the extended tongue between two silicone-padded steel plates. A dental-grade silicone bite guard seated inside the mouth behind the plates holds the jaw open. The tongue is locked forward — the occupant cannot retract it, close the mouth, or speak clearly. Designed for oral access, humiliation, or targeted tongue play. The headband has D-ring attachment points for tethering to furniture. Can be used standalone or with other restraints. All external steel: 316 stainless, polished. Mouth-contact components: autoclavable medical-grade silicone. Bite guard available in three sizes.

9. #9Pillory

   Keys: pillory

   Enabled · Selective · Before character · Order 100 · 100%

   Entry settings

   Pillory: A standing stock on a post, positioning the occupant bent forward with head and wrists captured in a horizontal stock plate at approximately waist height. Distinguished from standard stocks by the low mounting height which forces a bent-over posture exposing the buttocks and genitals from behind. Frame: single vertical post of 2" steel square tubing bolted to a floor plate, or dual-post configuration for stability. Stock plate mounts at adjustable height (30"-42") via sliding sleeve and locking pin. Stock plate: two 3/16" steel plates, hinged and padlocked, with three silicone-gasket-lined apertures (neck center, wrists flanking). The bent posture creates a natural presentation position — the occupant cannot straighten up without pulling against the neck aperture. Rear access is unobstructed. Floor plate has D-ring anchor points for ankle tethers. 316 stainless or powder-coated steel. Brass padlock included.

10. #10Bondage Horse / Sawhorse

    Keys: bondage horse, wooden horse, sawhorse, sawbuck

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Bondage Horse/Sawhorse: A narrow padded beam at waist height straddled by the occupant. Frame: welded steel A-frame or straight legs, powder-coated, rubber-padded feet with optional floor anchors. Beam: 4" wide at the top, 36"-48" long, padded with 2" high-density foam under antimicrobial PU leather. Top edge may be flat, slightly rounded, or peaked — peaked profile concentrates pressure on the perineum and genitals. Height adjustable 28"-40" via telescoping legs with locking pins. Restraint points: D-rings along both sides of the beam for thigh or hip straps, D-rings on each leg for ankle tethers, optional overhead hardpoint for wrist cuffs (arms overhead). The occupant straddles the beam with body weight pressing genitals against the surface. If set above comfortable flat-foot standing height, the horse becomes a predicament device — the occupant must bear weight on the genitals. Adding ankle tethers to floor rings eliminates the option of relieving pressure by shifting to the feet. All hardware 316 stainless.

11. #11Suspension Frame / Hardpoint Rig

    Keys: suspension frame, suspension gantry, suspension rig, hardpoint frame, hardpoint rig

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Suspension Frame/Hardpoint Rig: A freestanding structural frame providing overhead hardpoints rated for full human suspension. Frame: welded 3"x3" steel square tubing or engineered steel I-beam span, configured as a rectangular portal or A-frame gantry. Minimum overhead clearance 8 feet at the hardpoint. Base footprint approximately 6'x6', weighted (200+ lbs) and/or floor-bolted. Overhead beam has a sliding trolley for adjustable horizontal positioning and 3-5 fixed welded hardpoint rings rated at 1,000 lbs each, distributed along the span. Each hardpoint accepts standard carabiner or snap-hook attachment for rope, chain, suspension cuffs, or harnesses. Side uprights have D-rings at multiple heights for lateral tethering. Also serves as anchor for strappado, partial suspension, or predicament configurations. Powder-coated matte black. All hardpoint rings and trolley: 316 stainless, load-rated and proof-tested. Replaces the need for ceiling hardpoints in venues where structural modification is not possible.

12. #12Spreader Bar Frame (Floor-Mounted)

    Keys: floor-mounted spreader, spreader frame, spreader bar frame, floor spreader

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Spreader Bar Frame (Floor-Mounted): A rigid frame bolted to or resting on the floor, holding the occupant's legs spread apart via integrated ankle restraints at fixed width. Horizontal steel bar (1.5" round tubing, 36"-60" length) mounted between two weighted base plates or bolted directly to the floor. Each end has a padded 2" leather ankle cuff on a short tether to a welded D-ring. Center of the bar has an optional removable upright post rising to a D-ring at 12"-18" for attaching a crotch rope, genital tether, or short collar leash — preventing the occupant from collapsing the spread or stepping over. Additional D-ring anchor points along the bar for supplementary tethers. Unlike a portable spreader bar worn between ankle cuffs, this is a fixed installation anchoring the occupant to a specific floor position. Combines with overhead wrist suspension, wall-mounted wrist anchors, or other furniture. Powder-coated steel, 316 stainless D-rings.

13. #13Bondage Cage

    Keys: steel cage, bondage cage, cage

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Bondage Cage: A freestanding or floor-bolted steel cage for a standing or seated adult occupant. Construction: 1" steel round bar stock, MIG-welded at all joints, bar spacing 4"-6". Powder-coated matte black. Standard dimensions: 30"x30" base, 72" height (standing) or 36" height (crouching/seated). Door: full-height hinged panel on one side, hasp and padlock. Interior: bare steel floor (optional padded mat), no built-in restraints — the cage itself is the restraint. Optional additions: interior D-ring anchor points welded to bars at various heights for cuffing occupant to walls; collar tether point at top; feeding port (hinged 6"x6" panel at face height); rear access panel (hinged section at hip height) for genital or buttock access while caged. Rubber-padded feet or floor bolt-down. Weight approximately 80-120 lbs. All welds ground smooth, bar ends capped. Brass padlock included with 2 keys.

14. #14Electrified Cage Floor Grid (sub-entry of Bondage Cage)

    Keys: shock floor, electrified cage, electrified floor, cage floor grid, electric cage floor

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Electrified Cage Floor Grid: An accessory for the bondage cage or any confinement furniture — a steel grid panel replacing the cage floor, wired to a controllable e-stim source. Grid: 1/4" stainless steel rod, 1" crosshatch spacing, insulated from the cage frame by polymer standoffs. Connects via shielded cable to a dedicated TENS controller. Output: 0-80mA, 1-150Hz. Modes: continuous low-level discomfort, timed pulse at operator-set intervals, motion-activated (vibration sensor triggers shock when occupant shifts weight, enforcing stillness), and random unpredictable timing. All current paths between grid bars only — no ground through the cage frame. Maximum current hardware-limited. The occupant cannot avoid grid contact inside the cage. A foam mat placed over the grid allows the operator to grant or remove comfort at will. Emergency off switch on controller. Optoisolated from mains power.

15. #15Bondage Table

    Keys: restraint table, bondage table

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Bondage Table: A heavy padded flat table with restraint points at all limb and torso positions. Frame: welded 2"x2" steel square tubing, powder-coated matte black. Surface: 72"x30", 3" high-density foam over rigid steel pan, antimicrobial PU leather. Height 30"-36" (fixed or adjustable). Restraint layout: padded 2" leather cuffs at four corners (wrists and ankles) on short tethers to welded D-rings. Additional D-rings at shoulder, mid-torso, hip, and mid-thigh along both edges for chest strap, waist strap, and thigh straps. Optional overhead arch attachment: steel arch rising from each long side at the head end, meeting above the face, providing a hardpoint for head harness, gag, or hood tethering. Split-leg option: surface splits from hip down into two independently positionable leg sections with individual calf and ankle cuffs, allowing legs to be spread, elevated, or stirruped. Weight approximately 100 lbs. Floor bolt-down plates optional. All hardware 316 stainless.

16. #16Gynecological / Stirrup Chair

    Keys: stirrup chair, examination chair, stirrups, gynecological chair, gyno chair

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Gynecological/Stirrup Chair: A reclined chair modeled on a medical examination chair with integrated leg stirrups positioning the occupant with legs elevated, spread, and locked open for full genital access. Frame: welded steel, powder-coated. Seat and backrest: contoured foam and PU leather, recline angle adjustable 30-70 degrees via ratchet. Stirrups: padded steel cradles on articulating arms, each independently adjustable in height, spread angle (0-45 degrees outward), and knee bend angle. Each stirrup has a padded ankle cuff and knee strap. When locked, legs are held open and immobile. Additional restraints: wrist cuffs at armrests, waist strap, chest strap, optional head harness tether at backrest top. The seat has a removable center section swappable for an open-frame perineal access panel providing unobstructed access to genitals and anus from below. Lockable wheeled casters. Designed for examination scenes, forced orgasm, or medical play. All upholstery antimicrobial PU leather. 316 stainless hardware.

17. #17Queening Stool

    Keys: smotherbox stool, queening chair, face sitting stool, queening stool, facesitting stool

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Queening Stool: A low open-seated stool for the dominant to sit over the face of a kneeling submissive below. Frame: welded 1.5" steel square tubing, powder-coated. Seat: a padded rim (3" wide, PU leather over foam) surrounding a large central opening (approximately 10"x8"). Seat height 16"-20", allowing a kneeling sub to position their face directly beneath the opening. Padded armrests and low backrest for dominant's comfort. D-ring anchor points under the seat on each leg for tethering the sub's collar, wrist cuffs, or head harness to hold them in position. Optional head cradle accessory: a padded C-shaped rest bolting beneath the seat to support and position the sub's head upward-facing. Floor-level ankle tether D-rings prevent the sub from withdrawing. The dominant sits comfortably while the sub provides oral service from below with no ability to pull away if tethered. 316 stainless hardware.

18. #18Wall Rack / Shackle Wall

    Keys: wall chains, shackle wall, wall rack, shackles, wall shackles

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Wall Rack/Shackle Wall: A reinforced wall section or freestanding panel fitted with multiple anchor points, shackles, and chains at various heights. Panel: 1/4" steel plate, 48"x72" or larger, bolted to structural wall or mounted in a freestanding frame. Powder-coated matte black. Welded 316 stainless D-rings in a grid pattern at 12" intervals across the panel. Included shackle sets: a pair of overhead wrist shackles on short chains (forged steel, padlocked, silicone-lined), waist-height D-rings for hip or elbow tethering, and a pair of ankle shackles at floor level. All chain lengths adjustable via multiple link attachment points. The grid layout allows any configuration: arms overhead, spread-eagle, arms at sides, asymmetric positions. Supplementary hardware can be added to any D-ring. The most flexible single piece for standing or wall-pinned bondage. 316 stainless hardware throughout.

19. #19The Cornerstone — Full-Restraint Breeding Bench

    Keys: the cornerstone, breeding bench, cornerstone, breeding table

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    The Cornerstone — Full-Restraint Breeding Bench: A purpose-built posterior-entry breeding bench with conception-optimized pelvic geometry and post-coital retention capability. Rated 400 lbs. Eleven restraint points. Frame: 2"x2" 16-gauge steel square tubing, MIG-welded, electrostatic matte powder coat (black, gunmetal, or oxblood). Assembled 48"L x 28"-36"W, hip pad height 24"-36". Ships disassembled in two cartons, largest piece 30". Four rubber-footed legs with threaded levelers; optional bolt-down floor anchor plates. BODY SUPPORT: Torso pad (18"x14"x4") uses 4 lb/ft3 memory foam under medical-grade antimicrobial PU leather. Two oval breast apertures (7"x5" each) with soft silicone gasket rims providing light compression and maintaining engorgement of hanging tissue; internal aluminum channel maintains shape under full body weight. Central sternum ridge. Modular tool-free insert in narrow (5"), standard (7"), or wide (9") breast-spacing variants. Hip/pelvis wedge pad (12"x14", 6" peak, 5 lb/ft3 foam) drives anterior pelvic tilt. Knee pads: gel-infused contoured cradles on each leg rest arm. Shin pads: closed-cell EVA. Optional removable chin rest clips to front crossbar. TILT SYSTEM: Gas-piston telescoping legs adjust hip height 24"-36". Differential front/rear height creates Trendelenburg tilt 0-15 degrees (5-degree ratchet increments), extendable to 20 degrees for retention. Wedge pad provides independent fixed 15-degree anterior pelvic tilt. Combined effective pelvic elevation at maximum: 25-30 degrees relative to torso. RESTRAINT SYSTEM (11 points): Wrists (1-2): 2" sheepskin-lined leather cuffs, double-lock roller buckle, quick-release pull-tab, 1" D-ring, anchored via 316 stainless swivel snap hooks to welded D-rings on front uprights, 4"-6" play. Upper torso strap (3): 3" nylon webbing, foam-padded PU leather inner face with vertebral relief channel, fits 26"-48" chest, cam buckle with emergency pull-tab, both ends on sliding vertical 8" track channels on side rails with locking pin. Waist/hip strap (4): same 3" construction, fits 24"-50", fixed anchor at hip pad level, maintains pelvic geometry. Knees (5-6): 2" leather cuffs tethered via 4" PU-sleeved stainless chain to knee cradle anchor rings. Shins (7-8): 2" leather cuffs to shin bars. Ankles (9-10): 2" leather cuffs, swivel snap hook, 3" tether to leg rest arm terminals. Each leg locked at three points to its own independent arm. Neck (11): Standard: 1" steel collar anchor post on front crossbar, telescoping 4"-10", 360-degree swivel D-ring rated 200 lbs, 2"-8" adjustable PU-sleeved chain tether to included 2" sheepskin-lined locking collar with front and rear O-rings and brass padlock. Final connection uses magnetic breakaway at approximately 15 lbs perpendicular pull. Premium add-on: articulating neck yoke with two-pivot arm, U-shaped memory foam yoke contacting sides and rear of neck only, adjustable 3"-5" inner width. INDEPENDENT LEG RESTS: Two cantilevered arms of 1.5" steel round tubing, each bolted to its rear upright. Outward angle 0-45 degrees, height adjustable per arm. Each carries knee cradle, shin bar with pad, and ankle anchor ring. Zone between thighs and behind hip pad fully unobstructed at all heights. Male partner has unrestricted standing or kneeling access. POST-COITAL RETENTION: Trendelenburg increased to 20 degrees, knee pads lowered to shift weight forward, all 11 points engaged, occupant held immobile with hips elevated 15-20 minutes. Optional magnetic-mount digital countdown timer. HARDWARE: All D-rings, snap hooks, swivels, chain, and anchors 316 stainless. Buckles solid brass or 316 stainless, roller tongues. Cam buckles anodized aluminum rated 500 lbs. Gas pistons rated 10,000 cycles. Safety shears (7.5" blunt-tip EMT) stored on spring-clip hook welded to right frame rail.

20. #20Sex Swing Frame

    Keys: sex swing, love swing, bondage swing, swing frame

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Sex Swing Frame: A freestanding or ceiling-mounted frame supporting a body harness on chains, allowing the occupant to be suspended at waist height swinging freely. Freestanding frame: welded 3"x3" steel square tubing portal, approximately 7' tall and 4' wide. Overhead beam has a central swivel hardpoint rated 500 lbs. Base weighted (150+ lbs) with floor bolt-down option. Swing: heavy-duty nylon webbing seat with padded hip and back straps and two leg straps or stirrup loops. Four suspension chains connect seat to overhead swivel. Occupant sits with legs elevated in stirrups, genitals exposed and accessible. D-ring attachment points on harness at wrists, ankles, and waist for supplementary cuffs. Bearing-mounted swivel allows rotation. Can also mount to ceiling hardpoint or suspension frame. 316 stainless hardware. Harness: 5,000 lb rated nylon webbing, padded with PU leather at contact surfaces.

21. #21Dungeon Bed with Integrated Restraints

    Keys: dungeon bed, bondage bed, restraint bed

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Dungeon Bed: A heavy steel-framed bed with integrated restraint points for sleep, display, or extended sessions. Frame: welded 2"x2" steel square tubing with headboard and footboard. Steel slat base supporting a 6" high-density foam mattress under antimicrobial waterproof PU leather (black). Queen size 60"x80". Restraint points: welded 316 stainless D-rings at each corner (4 primary), plus intermediate D-rings along each side rail at 12" intervals (8-10 additional), plus D-rings along headboard and footboard. Total 16+ anchor points for any position — spread-eagle, hogtie, fetal, prone, diagonals. Included: four padded 2" leather cuffs with 18" chain tethers and snap hooks. Headboard and footboard: vertical 1" round steel bars at 4" spacing for rope, chain, or cuff attachment at any height. Optional under-bed storage cage: shallow steel-bar enclosure beneath the frame, 10" internal height, padlocked front panel — stores a second occupant in prone confinement. Weight approximately 150 lbs without mattress. Powder-coated matte black. Rubber-padded feet.

22. #22Bondage Barrel / Barrel Horse

    Keys: bondage barrel, barrel horse

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Bondage Barrel/Barrel Horse: A cylindrical padded barrel mounted horizontally at waist height, over which the occupant is draped face-down. Frame: two welded steel A-frame supports. Barrel: 20" diameter steel cylinder, 30" long, padded externally with 2" high-density foam under antimicrobial PU leather. Occupant drapes forward over the curved surface — hips at the apex, head and arms forward, buttocks presented rearward. Restraint points: D-ring anchors at each A-frame base (wrist tethers front, ankle tethers rear), waist strap over lower back around barrel, optional thigh straps. Height adjustable 28"-40" via telescoping legs. The barrel's curvature naturally separates the buttocks and exposes genitals from behind. Unlike a flat bench, the curved surface forces a pronounced spinal arch, deepens the presentation angle, and eliminates flat bearing surface the occupant could push against. Powder-coated steel frame. 316 stainless hardware.

23. #23Bondage Post / Column

    Keys: bondage post, restraint pole, bondage pole, restraint post, bondage column

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Bondage Post/Column: A vertical steel pole with D-ring anchor points at multiple heights for tethering an occupant standing against the pole. Post: 2" diameter steel round tubing, powder-coated matte black, 7' tall. Floor-mounted via 10"x10" base flange with four expansion anchors. Optional ceiling brace (telescoping upper cap). D-ring anchor points: welded 316 stainless rings at 6" intervals from floor to top — attachment at ankle, knee, waist, chest, wrist, and neck heights. Occupant stands with back to the post (or facing it) and is secured at multiple heights. Deliberately minimal — a single vertical element providing versatile anchor without bulk or complexity. Excellent for rope bondage (central tie point), predicament configurations, or cuffed-to-post restraint. Optional horizontal cross-arms: short steel arms (12"-18") bolted at any height via collar clamps, extending to each side with terminal D-rings — converts the post to a T-shape or cross as needed.

24. #24Kneeling Bench

    Keys: kneeler bench, kneeling bench

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Kneeling Bench: A low padded bench restraining the occupant in a kneeling position. Frame: welded 1.5" steel square tubing, powder-coated matte black. Knee platform: 24"x16", 3" gel-infused memory foam under antimicrobial PU leather, 6"-8" height. Shin rests slope behind. Upright post or frame rises from front edge with wrist anchor D-rings at 24"-30" for wrists bound in front, or overhead horizontal bar at 36"-48" for wrists above head. Restraint points: ankle cuffs tethered to rear D-rings (preventing rising), knee straps, waist strap to upright, wrist cuffs to front D-rings or overhead bar. Occupant kneels restrained from knees down and wrists up with torso accessible from all sides. Back fully unobstructed. Front access depends on wrist position — overhead wrists open the front completely. Compact piece for oral service positioning, display kneeling, or worship postures. Footprint approximately 24"x20". Weight approximately 25 lbs.

25. #25Inversion / Tilt Table (Horizontal / Angled / Fully Inverted)

    Keys: inversion frame, tilt table, inverted, inversion table

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Inversion/Tilt Table: A padded table on a central pivot allowing the occupant to be rotated from horizontal to fully inverted. Frame: heavy welded steel base with two upright supports carrying a central axle. Surface: 72"x24", 3" foam under antimicrobial PU leather on rigid steel pan. Restraint points: padded ankle cuffs at foot end rated for full body weight, wrist cuffs at head end, waist strap, chest strap — all rated for any orientation. HORIZONTAL (0 degrees): Standard flat bondage table with future angle adjustment capability. ANGLED (1-89 degrees): Tilted via central pivot, locked by heavy ratchet with locking pin at 5-degree increments. Partial inversion (30-45 degrees head-down) shifts blood to head, creating lightheadedness and vulnerability. Head-up also possible. FULLY INVERTED (180 degrees): Occupant hangs completely upside-down, all weight on ankle restraints and straps. Maximum recommended inversion: 15-20 minutes. Pivot axle: 1.5" steel shaft through pillow-block bearings. Emergency release: single lever disengages ratchet; gas-assisted damper returns table to horizontal slowly. Base weight 120+ lbs. Floor bolt-down plates included.

26. #26Milking Table

    Keys: milking table, milking bench

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Milking Table: A padded elevated table with strategic cutouts allowing breasts or genitals to hang through while the occupant lies prone. Frame: welded 2"x2" steel square tubing, powder-coated. Surface: 72"x28", 4" high-density foam under antimicrobial PU leather, height 28"-36" adjustable. Interchangeable surface panels (tool-free swap): BREAST PANEL: two oval apertures (7"x5" each) with silicone gasket rims at upper chest position — breasts hang through, accessible from below. GENITAL PANEL: single elongated oval aperture (8"x6") at hip position — cock and balls or vulva hang through for access from below. COMBINATION PANEL: both breast and genital apertures in one panel. Table clearance beneath is open — operator kneels or sits beneath on a rolling mechanic's creeper or low stool to access hanging anatomy. Restraint points: padded 2" leather cuffs at each corner (wrists forward, ankles rear), waist strap across lower back, upper back strap across shoulder blades. Head rest: face cradle (massage-table style, padded ring) at the head end allows prone breathing. Floor under the table is unobstructed for below-access. 316 stainless hardware. All aperture gaskets: medical-grade silicone, removable for cleaning.

27. #27Stretching Rack

    Keys: stretching rack, rack, bondage rack

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Stretching Rack: A modern horizontal frame with adjustable wrist and ankle draw points for progressive or held limb extension. Frame: welded 2"x2" steel square tubing, rectangular bed approximately 78"x30", height 24"-30" on fixed legs. Powder-coated matte black. Central sleeping surface: slatted steel pan with optional 2" foam pad and PU leather cover. At each end: a steel rail track running longitudinally. Wrist cuffs (head end) and ankle cuffs (foot end) attach to sliding carriages on these tracks. Each carriage is drawn by a lead screw driven by a hand crank (one at each end) with a self-locking worm gear preventing backslip. Each crank advances the carriage approximately 1" per full turn. Ratchet lock at any position. The occupant is secured in cuffs, and the operator cranks to take up slack, applying progressive tension along the full body axis. Tension is adjustable from zero slack to full extension limited only by occupant anatomy. Emergency release: quick-release pins on both carriages allow instant slack. Side D-rings along the frame rails for waist, chest, or thigh straps preventing torso twist. All cuff hardware 316 stainless. Carriages: UHMW polymer bushings on polished steel rails for smooth, silent draw.

28. #28Strappado Frame

    Keys: strappado, strappado frame

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Strappado Frame: An overhead rig specifically designed for strappado positioning — wrists bound behind the back and drawn upward, forcing the torso into a deep forward bend. Frame: single vertical post (2" steel round tubing, 8' tall, floor-bolted) with an overhead boom arm extending 24" forward at the top, or mounted to a suspension frame's overhead beam. Boom tip has a pulley with a locking ratchet and 316 stainless chain. Wrist cuffs (padded leather, behind-back configuration) connect via a short tether to the chain. The operator raises the chain via the ratchet, drawing the wrists upward behind the occupant. As wrists rise above back level, the occupant is forced to bend forward at the waist — at full strappado the torso approaches horizontal with arms pulled vertically behind. Ratchet locks at any height. Emergency release: ratchet has a controlled-descent lever lowering the chain smoothly rather than dropping. Floor anchor D-rings for ankle tethers holding feet in position. Critical safety note: strappado creates significant shoulder load — progressive application and shoulder-flexibility assessment required. 316 stainless chain, pulley, and hardware.

29. #29Suspension Trapeze Bar

    Keys: suspension trapeze, suspension bar, trapeze bar

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Suspension Trapeze Bar: A ceiling-mounted or frame-hung horizontal bar with attachment points for suspension bondage. Bar: 36" wide, 1.5" diameter 316 stainless steel round tubing, polished. Suspended by two heavy chains (one at each end) from ceiling hardpoints or suspension frame beam. Chain length adjustable by link selection — bar height settable from 4' to 8'. Welded D-rings at each end, center, and two intermediate positions (5 total attachment points along the bar). Designed for: wrist cuffs attached overhead (occupant standing or on tiptoe below the bar), partial suspension (occupant's weight partially supported by bar via wrist or ankle attachments), full inversion (ankles attached to bar, occupant hanging inverted), or spread-bar use (wrist cuffs at each end hold arms spread horizontally overhead). Each chain terminates at its ceiling hardpoint with a load-rated swivel allowing the bar to rotate. Weight rating: 500 lbs at center point. Simple, versatile overhead attachment that adds suspension capability to any room with structural ceiling points. 316 stainless throughout.

30. #30Wall-Mounted Spreader Frame

    Keys: wall-mounted spreader, wall spreader frame, wall spreader, wall spread eagle

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Wall-Mounted Spreader Frame: A fixed spread-eagle frame bolted flat against a wall. Frame: rectangular outline of 2"x2" steel square tubing, approximately 72" wide by 84" tall, lag-bolted to structural wall studs or masonry at multiple points. Powder-coated matte black. Restraint points: four primary D-rings at the corners (wrists upper, ankles lower) with padded leather cuffs on adjustable-length tethers. Intermediate D-rings along each vertical upright and horizontal crossbar at 8" intervals for waist, chest, thigh, knee, elbow, and neck restraint positioning. The occupant stands facing outward or facing the wall, spread-eagled against the frame. Unlike the St. Andrew's Cross (X-shaped, padded contact surface), this is a flat rectangular frame providing anchor points without a padded backing — the occupant stands against the bare wall or the frame's open interior. Simpler, lower profile, and mounts flush to the wall. Can be combined with a wall rack panel behind for additional anchor density. 316 stainless D-rings and hardware.

31. #31Fucking Machine Mount and Platform

    Keys: fucking machine, sex machine, fucking machine mount, fuck machine, machine mount

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Fucking Machine Mount and Platform: An immobilization platform with an integrated powered fucking machine aligned for penetration of the restrained occupant. PLATFORM: Steel-framed padded bench or table positioning the occupant in prone, doggy-style, supine, or on-back-legs-elevated positions depending on configuration. Restraint points at wrists, ankles, waist, and thighs lock the occupant in alignment with the machine's stroke axis. MACHINE: Geared DC motor driving a reciprocating arm through a linear slider mechanism. Stroke length: 1"-8" adjustable via crank. Stroke rate: 0-300 strokes per minute via variable speed controller. Arm terminates in a universal Vac-U-Lock adapter accepting any compatible attachment (dildos, plugs — medical-grade silicone, various sizes and profiles). Machine mounts to the platform frame on a rail allowing fore-aft and height adjustment for precise anatomical alignment. Operator control panel: speed dial, stroke length lock, emergency stop button, timer (fixed duration or continuous). The platform restraints prevent the occupant from shifting away from the machine's stroke. Vibration dampening mounts isolate machine noise and vibration from the platform frame. Machine: powder-coated steel housing. All contact attachments: platinum-cure medical-grade silicone, autoclavable. Platform hardware: 316 stainless.

32. #32Bondage Ottoman / Cube

    Keys: restraint ottoman, bondage ottoman, restraint cube, bondage cube

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Bondage Ottoman/Cube: A padded cube with D-ring anchor points on all six faces, serving as a versatile modular bondage surface. Dimensions: 24"x24"x18" (width x depth x height). Construction: welded steel internal frame, padded on all faces with 2" high-density foam under antimicrobial PU leather (matte black). Welded 316 stainless D-rings: four per face (one near each corner), 24 total. Weight approximately 35 lbs — portable. Rubber-padded base. Functionality depends on positioning: occupant kneels over it (bent-over presentation), lies prone across it (hip elevation), sits on it (chair-style restraint), or lies supine on it (back arch). Cuffs attach to whichever face's D-rings match the desired position. Low, unobtrusive, and easily repositioned. Multiple cubes combine for longer surfaces. Can be placed inside cages, on beds, or on other furniture. No built-in cuffs — uses standard snap-hook cuffs from any other equipment.

33. #33Display Stand / Frame

    Keys: display post, display frame, presentation frame, display stand

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Display Stand/Frame: A freestanding frame for presenting a bound occupant upright in a display position. Frame: welded steel, two vertical uprights (2"x2" square tubing, 7' tall) connected by a top crossbar and a base crossbar, forming a rectangular portal approximately 36" wide. Powder-coated matte black. Weighted base (80 lbs) with optional floor bolt-down. Restraint points: adjustable-height sliding collar clamps on each upright, each carrying a horizontal arm extending inward 6"-10" and terminating in a D-ring. Wrist cuffs attach to upper arms (arms spread, at shoulder height or overhead). Ankle cuffs attach to lower arms or base crossbar D-rings. Additional waist and collar tethers to uprights. The frame is open on all four sides — the occupant is visible and accessible from any angle. Designed for exhibition, inspection, or admiration. Minimal structure maximizes visibility of the occupant's body. Rotatable base plate option (lazy-susan bearing) allows the entire frame and occupant to be slowly rotated for 360-degree viewing. 316 stainless hardware.

34. #34Bondage Ladder

    Keys: bondage ladder

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Bondage Ladder: A wall-leaning or freestanding ladder with rungs serving as versatile tie points at every height. Construction: two steel side rails (1.5" round tubing, 8' tall) with round steel rungs welded at 6" intervals — approximately 16 rungs. Powder-coated matte black. Freestanding via A-frame rear support legs or leaned against a wall with rubber anti-slip feet and top wall bumpers. Each rung serves as a natural rope tie-off point, cuff anchor, or strap pass-through. D-rings welded to alternating rungs for clip-on restraint attachment. The occupant stands facing the ladder or facing away from it, with wrists, ankles, waist, and any other point tied to rungs at the appropriate heights. Unlike the wall rack (flat panel with D-rings), the ladder provides cylindrical bars that accept wraps, hitches, and loops — ideal for rope bondage. Rung spacing allows extremely precise vertical positioning of restraint points. Lightweight (approximately 30 lbs) and repositionable. 316 stainless D-rings where installed.

35. #35One-Bar Prison

    Keys: impalement post, impalement pole, one-bar prison, one bar prison

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    One-Bar Prison: A gravity-restraint device using the occupant's own body weight as the primary immobilization mechanism. No cuffs, straps, or locks required for basic function — the insertable attachment anchors the occupant in place and gravity penalizes any attempt to relax or lower the body. STRUCTURE: Single vertical pole of 1.5" diameter 316 stainless steel round tubing, floor-bolted via a 12"x12" steel base plate with four expansion anchor points. Height adjustable 24"-42" at the attachment mount via telescoping inner sleeve locked by spring-loaded detent pin at 1" increments. Optional freestanding weighted base (50 lb cast steel, rubber-padded). ATTACHMENT MOUNT: Universal top plate with threaded stud (Vac-U-Lock compatible). Included: one medical-grade platinum-cure silicone dildo (6"x1.5", smooth) and one rigid stainless steel plug (4"x1.75", polished, bulbed profile with 1.25" neck for retention). All attachments autoclavable at 121C. HEIGHT CALIBRATION: Set so occupant must stand on balls of feet or near tiptoe for comfortable accommodation at partial depth. Lowering heels increases penetration depth and internal pressure. Full flat-footed standing drives attachment to maximum depth. The choice is sustained muscular effort in calves and thighs, or deeper impalement. Fatigue guarantees gradual descent. DISMOUNT PREVENTION: Bulbed profile resists upward withdrawal once settled. Lateral stepping painful and mechanically difficult. OPTIONAL RESTRAINT ADDITIONS: Upper wrist bar (horizontal crossbar via collar clamp at shoulder height, 10" extension each side, terminal D-rings, padded cuffs prevent self-lifting). Ankle spreader (two floor-level D-ring plates 18"-24" apart, ankle cuff tethers hold feet in position). Overhead suspension ring (chain tether from wrist cuffs to ceiling hardpoint, arms up, eliminating self-assistance). MATERIALS: All steel 316 stainless or powder-coated carbon steel. Contact surfaces polished or medical-grade silicone. Hardware 316 stainless. Cuffs medical-grade PU leather with sheepskin lining, stainless roller buckles.

36. #36CBT Wall Bracket

    Keys: ball bracket, CBT bracket, scrotal bracket, CBT wall bracket, scrotal wall

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    CBT Wall Bracket: A rigid wall-anchored scrotal restraint immobilizing the occupant by locking around the scrotum and connecting to the wall via an unyielding steel bar. Any pull transmits directly to the restrained scrotum. BRACKET (LOCKING SCROTAL CUFF): Two-piece hinged ring of polished 316 stainless, semicircular halves closing around the neck of the scrotum above the testicles. Interior diameter adjustable via interchangeable sizing inserts (25mm, 30mm, 35mm) lined with 2mm medical-grade silicone. Closure: hex-socket cap screw on hinge side, stainless padlock hasp on closure side. Brass padlock included. When locked, testes act as anatomical anchor preventing withdrawal. Edges fully radiused and polished. Weight approximately 200g. CONNECTING BAR: Rigid 316 stainless round bar, 3/4" diameter, available in 12", 18", 24", and 36" fixed lengths. One end: ball-joint swivel mount (allows limited angular movement without torque concentration on scrotum). Other end: wall flange mount. Bar is rigid — movement away from wall transmits as direct pull. Shorter bars restrict more severely; 12" holds occupant nearly flush to wall. WALL MOUNT: 4" diameter circular flange plate, 1/4" steel, four mounting holes for lag bolts or expansion anchors. Bar rotates freely in horizontal plane (180-degree arc) but limited vertical play (approximately plus/minus 15 degrees), preventing crouching to relieve tension without pulling downward on scrotum. Quick-release pin for post-session bar removal. SAFETY: Padlock is single point of release — bolt cutters free cuff immediately. Ball-joint swivel prevents torque injury from lateral movement. Limited vertical range prevents occupant dropping to floor and applying full body weight. OPTIONAL ADDITIONS: Wall-mounted wrist cuffs preventing occupant from reaching bracket. Ankle spreader bar (24" rigid, ankle cuffs). Adjustable tension spring replacing rigid bar — constant gentle pull toward wall maintaining baseline scrotal tension. MATERIALS: All steel 316 stainless polished. Inserts and liners medical-grade platinum-cure silicone, autoclavable. Cuffs: medical-grade PU leather, sheepskin lined, stainless roller buckles.

37. #37Body-Shaped Cage

    Keys: form cage, body cage, form-fitting cage, contour cage, body-shaped cage

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Body-Shaped Cage: A small cage contoured to the standing human form, enclosing the occupant with minimal clearance in every dimension. Construction: 1" steel round bar stock, MIG-welded, bars follow the contours of the human body — narrowing at head and feet, widening at shoulders and hips. Approximate dimensions: 72" tall, 22" wide at shoulders, 14" deep. Bar spacing 3"-5", close enough to prevent limb extension or meaningful movement. The occupant stands inside with arms at sides or lightly folded. Door: full-length hinged front panel, padlocked. The cage is not roomy enough to sit, turn around, or raise arms. Internal D-ring anchor points at neck, wrist, waist, and ankle heights allow further restraint within the cage. Optional: rigid collar ring welded at neck height, closing around the throat to hold the head up and prevent slumping. Floor ring for ankle tethers. The cage hangs from a ceiling hardpoint or suspension frame (overhead lifting eye rated 500 lbs) or stands on a floor base with leveling feet. Occupant is visible through the bars from all angles. Powder-coated matte black. Brass padlock included. Weight approximately 50 lbs.

38. #38Bondage Wheel

    Keys: bondage wheel, rotating wheel, wheel

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Bondage Wheel: A large vertical wheel on a central axle to which the occupant is strapped spread-eagle. The wheel rotates freely or locks at any angle — the occupant can be positioned upright, inverted, sideways, or anywhere in between. Wheel: 7' diameter, constructed from welded steel tubing forming a circular rim with four or more radial spokes meeting at a central hub. Rim and spokes padded on the inner (occupant-facing) side with 1" closed-cell foam under antimicrobial PU leather. Restraint points: padded 2" leather cuffs at four spoke tips (wrists and ankles for spread-eagle), plus waist strap and chest strap at inner ring positions. Axle: 2" steel shaft through heavy-duty pillow-block bearings mounted on two floor-bolted steel uprights, centerline at approximately 4' height. Locking: friction brake controlled by a hand lever — wheel holds at any rotational position. Emergency: brake has a default-locked ratchet requiring active release to rotate, preventing uncontrolled spinning. Rotation can be slow and deliberate or rapid. Inverted positions create blood-rush and extreme disorientation. Theatrical and psychologically intense. Total system weight approximately 200 lbs. Floor bolt-down required. All hardware 316 stainless.

39. #39Vacuum Bed

    Keys: vac bed, vacuum bed, vacbed, vacuum bondage

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Vacuum Bed: A rigid frame holding two sheets of heavy latex between which the occupant lies. A vacuum pump evacuates air, causing atmospheric pressure to compress the latex against the entire body surface simultaneously — total immobilization without any straps, cuffs, or bindings. Frame: welded 1.5" steel square tubing rectangle, approximately 78"x36". Latex sheets: 0.8mm thick natural or synthetic latex, sealed to the frame edges by a continuous clamping rail. Breathing: a reinforced hole or short tube at the head position allows mouth/nose breathing; alternatively a full-face snorkel tube extends outside the frame. Pump: electric vacuum pump mounted to the frame, draws approximately 3-5 inHg of vacuum (light but effective compression). Relief valve prevents over-vacuum. Pump cycles on a pressure switch maintaining constant vacuum as the latex slowly leaks air. Quick-release: large butterfly valve at the frame edge — quarter-turn instantly breaks vacuum and releases the occupant. The occupant is fully visible through the latex — body contours, facial features, genitals all outlined and pressed under the transparent or semi-transparent membrane. Tactile access through the latex is possible (vibrators, impact through the sheet). Complete sensory wrapping — the occupant feels pressure over every square inch of skin simultaneously. Frame rests on any flat surface or mounts to a wall vertically. 316 stainless hardware. Latex sheets replaceable.

40. #40Sling (Frame-Mounted)

    Keys: bondage sling, sling, leather sling

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Sling (Frame-Mounted): A flat body-cradle suspended from an overhead frame, holding the occupant supine at waist height with legs elevated in stirrups — fully accessible from between the legs and below. Distinct from a sex swing (seated, swinging). Frame: freestanding steel portal (3"x3" square tubing, 7' tall, 4' wide) with overhead beam, floor-weighted or bolted. Sling bed: heavy-duty leather or reinforced rubber sheet (approximately 72"x24"), reinforced edges with grommets. Suspended from the overhead beam at four points by adjustable chains — head end, foot end, and two mid-body. Chains allow height and angle adjustment. Leg stirrups: two heavy nylon webbing loops with padded calf cradles, suspended from the overhead beam by independent chains, holding legs elevated and spread. Stirrup height and spread independently adjustable. Restraint additions: wrist cuffs attached to head-end chains or to the frame uprights, ankle cuffs securing feet in stirrups, waist strap threading through sling grommets. The occupant lies back in the cradle with legs up and spread — the genital and anal area is presented at the operator's standing waist height, fully accessible for penetration, oral, or manual access. Sling gently conforms to body weight. 316 stainless chains and hardware. Leather bed replaceable.

41. #41Sybian / Saddle Mount with Restraints

    Keys: forced orgasm saddle, saddle mount, vibration saddle, sybian, riding machine

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Sybian/Saddle Mount with Restraints: A powered vibration saddle on a rigid pedestal with integrated restraints preventing dismount — a forced/inescapable stimulation device. Saddle: contoured medical-grade PU leather over rigid housing, approximately 14" long x 8" wide, shaped for straddling. Internal mechanism: high-torque motor driving an eccentric weight for intense broad-spectrum vibration (20-200Hz) plus a separate rotation motor driving a protruding attachment (Vac-U-Lock compatible, accepts any standard silicone attachment for vaginal or anal penetration). Vibration intensity and rotation speed: independently variable via operator control panel. Pedestal: 18" tall steel column on a 20"x20" weighted base plate (60 lbs), height adjustable 16"-24" to match occupant leg length. RESTRAINTS: Thigh straps: two padded straps anchored to the base plate, passing over each thigh and buckling at the outside — hold the occupant's weight on the saddle. Ankle tethers: D-rings at base plate corners, short chain to ankle cuffs, prevent dismounting by lifting legs. Wrist restraint: behind-back wrist cuffs tethered to a rear D-ring on the pedestal, preventing the occupant from lifting themselves off or covering the saddle. Optional waist belt: anchored to the pedestal, holds hips firmly in contact with the saddle surface. Once restrained, the occupant cannot lift off, close legs, or reduce contact with the vibrating/rotating mechanism. Stimulation is entirely under operator control. Operator panel: vibration intensity dial, rotation speed dial, pattern presets (constant, wave, random, escalating), timer, emergency stop. All contact surfaces antimicrobial PU leather or medical-grade silicone. 316 stainless hardware.

42. #42Smothering Box / Face-Access Box

    Keys: face box, face-access box, smothering box, smother box

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Smothering Box/Face-Access Box: The occupant lies enclosed in a padded box with only the face exposed through an opening in the top surface. The top is a flat, padded, weight-bearing platform for the dominant to sit or kneel on directly over the occupant's face. Box: welded 2"x2" steel frame, powder-coated, padded interior (2" foam, antimicrobial PU leather) sized for one adult supine — approximately 72"x24"x12" internal dimensions. Top panel: 1/4" steel plate padded on the upper (sitting) surface, with a single anatomically positioned face aperture (8"x6" oval, padded silicone gasket rim). The aperture is positioned so the dominant's genitals align directly over the occupant's mouth and nose when seated. Occupant restraints: internal padded wrist cuffs anchored to side walls, ankle cuffs at foot end, forehead strap holding head centered beneath the aperture. The occupant cannot turn away, close the aperture, or shift position. Top panel is hinged at one end and padlocked at the other for entry/exit. Ventilation: small screened ports at the foot end provide airflow when the aperture is not occluded. The dominant controls breathing access entirely by positioning. Optional: interchangeable top panels with additional apertures for breast access or genital pass-through. 316 stainless hardware. Brass padlock included.

43. #43Crotch Rope / Split Rail Frame

    Keys: crotch rope, crotch rail, split rail frame, split rail

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Crotch Rope/Split Rail Frame: A horizontal rail or taut cable at groin height between two uprights, straddled by the occupant — body weight presses genitals and perineum against the edge. A predicament device: standing on tiptoe relieves pressure; fatigue forces settling onto the rail. Frame: two steel uprights (2"x2" square tubing, 5' tall) bolted to floor plates, 36" apart. Between them: a horizontal rail of 1" steel round tubing or a taut 3/16" steel cable (turnbuckle-tensioned). Rail/cable height adjustable 28"-38" via sliding sleeve mounts on the uprights. Rail surface may be bare steel (intense), wrapped in rope (textured), or padded with a thin silicone strip (reduced but sustained). The occupant straddles the rail. Overhead wrist attachment: a horizontal crossbar between the uprights at approximately 7', with wrist cuffs holding arms overhead — this prevents the occupant from lifting themselves off the rail and adds shoulder/arm fatigue to the predicament. Floor ankle tethers on each side prevent the occupant from stepping to the side of the rail. The only relief is muscular effort in the legs, which inevitably fails. Distinct from the bondage horse (wider padded surface, more comfortable) — the split rail is narrow, intense, and purely predicament-focused. 316 stainless hardware.

44. #44Water Bondage Tank

    Keys: water bondage, bondage tank, submersion tank, water tank

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Water Bondage Tank: A rigid tank large enough for partial or full submersion of a restrained occupant, combining bondage with the sensory experience of water immersion. Tank: welded 316 stainless steel or 1/2" clear acrylic (for visual access) on a steel frame. Internal dimensions approximately 72"x30"x24" deep. Drain valve at base, fill via standard hose connection. Capacity approximately 200 gallons. Internal restraint points: 316 stainless D-ring anchor studs welded (steel tank) or bolt-mounted (acrylic tank) at floor and side walls — wrist, ankle, waist, and neck-level anchors. Neck ring: a rigid collar mount at the waterline, adjustable height, holding the occupant's head above water while the body is submerged. The occupant kneels, sits, or lies in the tank, restrained, with water at any level up to the collar ring. Water temperature controllable via external mixing valve — cold (5C) to warm (40C) for thermal play. Recirculating pump optional for current effect. Acrylic version allows full visual display of the submerged restrained body. Drain time: under 3 minutes via 2" drain valve (emergency evacuation). Overflow protection: standpipe at maximum safe level. Floor-mounted on heavy-duty casters (lockable) or permanent installation with floor drain connection. 316 stainless hardware throughout.

45. #45Predicament Post / Standing Endurance Pole

    Keys: endurance pole, standing post, predicament post, endurance post, predicament pole

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Predicament Post/Standing Endurance Pole: A vertical pole with overhead wrist attachment and a floor-level consequence feature creating a predicament — the occupant must maintain tiptoe or suffer the consequence at the feet. Post: 2" steel round tubing, 8' tall, floor-bolted via base flange. Top: overhead D-ring or horizontal crossbar for wrist cuffs, holding arms stretched upward. Floor level: interchangeable consequence inserts bolted to the base plate beneath the occupant's feet. OPTIONS: pointed nub plate (array of blunt rubber or steel points — uncomfortable to stand on flat-footed but tolerable on tiptoe when weight shifts to the balls of the feet), small raised platform (6"x6", occupant must stay balanced on it — stepping off the platform is the failure), or electrified contact plate (connected to TENS controller — flat-footed contact completes circuit and delivers shock, tiptoe breaks contact). Wrist cuff height is calibrated so the occupant can just reach the floor on tiptoe — arms fully extended, calves burning. Lowering heels engages the consequence. Fatigue is inevitable. Additional tether options: nipple clamp chains to mid-post D-rings (creating competing downward predicament), ankle spreader at base, collar tether to post. 316 stainless hardware.

46. #46Ballet Boot Training Rail (sub-entry of Predicament Post)

    Keys: ballet boot rail, ballet boot training, ballet boot barre, ballet training rail

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Ballet Boot Training Rail: A horizontal rail or barre at waist height for occupants wearing ballet boots (extreme-heel footwear forcing the foot into near-vertical en pointe position). Rail: 1.5" polished steel round tubing, 48" long, mounted between two uprights at adjustable height (30"-40"). Wrist cuffs tether the occupant's hands to the rail, providing a handhold for balance while simultaneously preventing them from stepping away. Ankle tethers to floor D-rings maintain foot position. The occupant must maintain en pointe stance — the ballet boots eliminate any flat-footed relief. The waist-height rail provides enough support to prevent falling but not enough to take significant body weight off the feet. Endurance and pain in the calves, ankles, and feet increase over time. The occupant can shift weight, grip the rail, and adjust stance but cannot sit, kneel, or remove the boots while restrained. Floor padding optional beneath. Compact piece — mounts to a wall or stands freestanding via base plates. 316 stainless hardware.

47. #47Punishment Box

    Keys: confinement box, punishment box, small box, cramped box

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Punishment Box: A small, enclosed, lightless box in which the occupant is folded or crouched in a deliberately uncomfortable compact position. Deliberately austere — no padding, no stimulation, no comfort. Pure isolation and spatial confinement. Construction: welded 16-gauge steel panels, powder-coated matte black. Interior dimensions approximately 30"x30"x30" — the occupant cannot stand, fully extend legs, or lie flat. Must kneel, crouch, or sit in fetal position. Door: single hinged panel with padlock hasp on outside only. Interior is featureless — bare steel, no handles, no padding, no light source. Ventilation: screened air ports (four 2" diameter holes with steel mesh) provide airflow but no light. Acoustically semi-isolated — occupant can hear muffled sounds from outside but cannot communicate effectively. External D-rings welded to top and sides allow the box to be chained in place, hoisted by overhead crane or winch, or lowered into an under-floor pit. Weight approximately 70 lbs empty. Rubber-padded base. The psychological effect of cramped, dark, featureless enclosure is the primary function. Brass padlock included.

48. #48Prayer Kneeler / Devotional Bench

    Keys: prayer kneeler, devotional bench, prayer bench, devotional kneeler

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Prayer Kneeler/Devotional Bench: A low kneeling platform with a raised arm shelf forcing a kneeling-upright devotional posture. Frame: welded 1.5" steel square tubing, powder-coated. Kneeling platform: padded (2" foam, PU leather), 20"x14", at floor level. Rising from the front: an angled shelf at approximately 24" height and 30-degree angle — the occupant's forearms rest flat on this shelf with hands together or spread. Wrist cuffs: padded leather, anchored to D-rings on the shelf surface, locking the forearms down. Ankle/shin restraints: straps across the calves tethered to the kneeling platform prevent rising. Waist strap: loops through the frame behind the occupant holding the torso upright. Optional collar tether: short chain from a D-ring at the top of a small vertical post rising from the shelf to the occupant's collar, holding the head bowed or facing forward. The posture is kneeling with back straight, hands forward on the shelf, head bowed — forced supplication. Thematically designed for worship, devotion, or obedience role-play scenes. Compact footprint: approximately 24"x30". 316 stainless hardware.

49. #49Rotating Bondage Frame

    Keys: rotating frame, spinning frame, rotating x-frame, rotating bondage frame

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Rotating Bondage Frame: A rectangular or X-shaped frame mounted on a central axle, allowing the occupant to be rotated to any angle — horizontal, vertical, inverted, or anywhere between. Distinct from the bondage wheel (circular) — this is a full-body frame providing padded support along the torso. Frame: welded 2"x2" steel rectangular frame, approximately 78"x36", padded on the occupant face with 1" closed-cell foam under antimicrobial PU leather. Restraint points: padded cuffs at all four corners (wrists and ankles), plus waist strap, chest strap, and thigh straps along the frame rails. Axle: 2" steel shaft through the frame's center of gravity, mounted in pillow-block bearings on two floor-bolted uprights. Locking: worm-gear hand crank and friction brake — frame positions smoothly to any angle and locks. Unlike the bondage wheel (dramatic, theatrical, rapid rotation possible), the rotating frame is methodical — used for slow deliberate repositioning. The occupant can be worked on horizontally, then rotated face-down, then tilted to any angle, without unbinding. Emergency: friction brake defaults locked. Total system weight approximately 150 lbs. 316 stainless hardware.

50. #50Humbler (Mounted Version)

    Keys: humbler, humbler device, humbler mount

    Enabled · Selective · Before character · Order 100 · 100%

    Entry settings

    Humbler (Mounted Version): A clamping bar that locks behind the thighs around the scrotum, forcing the occupant to remain bent forward — standing upright pulls on the trapped scrotum. This mounted version is bolted to a bench, floor plate, or wall bracket creating a fixed furniture piece rather than a worn device. Device: two curved steel bars (polished 316 stainless) forming a hinged clamshell that closes behind the upper thighs with the scrotum passing through a central aperture between the bars. Aperture lined with 2mm medical-grade silicone. Closure: hex-socket cap screw and padlock hasp. When closed, the bars sit in the crease behind the thighs with the scrotum pulled backward and trapped. Any attempt to stand upright pulls the scrotum against the bar — the occupant must remain bent at the waist. MOUNTING OPTIONS: Bench mount — humbler bar bolts to the rear edge of a spanking bench, locking the occupant bent over the bench with scrotum trapped behind. Floor mount — bar bolts to a low floor plate, occupant is on hands and knees with scrotum pulled back between the thighs. Wall mount — bar on a bracket at 30" height, occupant stands bent toward the wall. Each mount holds the humbler rigid so the occupant cannot maneuver the device to relieve tension. 316 stainless. Brass padlock included. Silicone liner autoclavable.

Showing 50 of 66

1 file

• .jsonjson_lorebookrebuilt

  146.9 KBfirst seen Apr 16, 20268eb61a20dd4797c8

  Download